Can You Use WD-40 On A Bike Chain?

Can You Use WD-40 On A Bike Chain?

When you bring your bike home, you feel that you need to maintain it to look just like new. Sometimes you’re tempted to use other chemicals to clean easily by rubbing off mud and dirt and some corrosions or stains. One thing you should know is that water isn’t a perfect cleaner, and can be corrosive and rusty to moving parts like spokes and shocks.

It is safe to apply WD-40 lubrication products. As a water lubricant, it’s a great way to lubricate the chain lube. WD-40 will also protect the chain against rust and corrosion.

Of course, using a WD-40 might seem like a quick short process, but you’ve been doing it wrongly. Some bike parts are rather easy to clean while others are not. Specifically, the chain is the most fragile part and it is the part you should care most for. 

cycles using a lot of wheels

That’s why you need to learn to do it correctly. And I’m here to help you with that, whether a beginner or an expert.

Can I Use WD-40 On My Bike Chain?

You can use WD-40 as a chain lubricant when riding in dry conditions only. You only need to rub off mud or dirt away from your bike chain and spray WD-40. Since it’s not water repellent, it can come off in the rain or conditions.

WD-40 is a water-like lubricant that comes with the right lubrication to the chain lube. Most bikers use it because it offers the right lubrication to the chain. 

There’s also proved evidence of these chains lasting longer than they would on regular lubricants. If you lubricate the chain lube correctly, you’ll not only keep away rust but also keep away harsh friction that damages the chain

In this guide, we’ll teach you how to lubricate the chain using a WD-40.

Lubricating Your Chain  

As you know, chain protection means keeping it lubricated for a smooth movement. You always rely on the chain to keep moving, so the chain should always remain lubricated.

There’s a short process to lubricate the chain without leaving a single side link.

  1. Move your middle gear and carefully spray WD-40
  2. Backpedal slowly as you spray the gears all round.

Do not overspray as it will only attract more dirt. Give the degreaser some time to act on the bike. It can last for as long as you can bike in a day.

Most bike owners rush to spray their chain lubes leaving out some parts. A simple part not degreased begins to rust instantly and will spread to other bicycle parts. Both rust and corrosion damage the bike chain, ergo, you should use the best lubricant to protect the chain. 

chain is rotating a wheel

When To Use WD-40

the cycle is under the tree

You should know that WD-40 isn’t a true lubricant, and there is fear that it might come out when water splashes/gushes on it.

Not always should you use WD-40. There are a few exceptions. During dry conditions, WD-40, being less oily, will arguably maintain the chain longer and better than most lubricants.

For best results, this us how to use it:

  1. Clean dirt on the bike chain and derailleur. Just spray the degreaser and rub off any dirt and mud. 
  2. Rinse the parts with soapy water and leave the bike to dry. 
  3. Spray WD-40 on the chain lube and other cleaned parts.

Never apply WD-40 on wet parts. Always allow them to dry first. You don’t need to use any other lubricant with WD-40. It can maintain your bike for between 8 to 12 hours in dry environments. That’s more than enough if you can bike for a single day!

“Simple Steps for Bike Chain Maintenance – WD-40 India” https://wd40.in/car-bike-garage-uses/top-tips-and-tricks-to-keep-your-bike-in-top-shape/amp/

“The Truth about WD-40 and Bike Chains – Bicycle 2 Work” https://bicycle2work.com/wd-40-and-bike-chains/

5/5 - (1 vote)

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top